Ford spare parts: Writing diagram: repair Starter

Starter fastening

1 – bolts of fastening of a starter to картеру couplings,

2 – a wire of power supplies of a starter,

3 – a wire of power supplies of the electromagnetic switch

Starters Lucas


1 – a head,
2 – knot of a drive,
3 – the lever of a drive,
4 – the electromagnetic switch,
5 – stator,
6 – a rotor,
7 – a back cover with brush holder


Starters Cajavec and Nippondenso


And – Starters Cajavec
1 – a head,
2 – knot of a drive,
3 – the lever of a drive,
4 – the electromagnetic switch,
5 – stator,
6 – a rotor,
7 – brush holder,



In – Starters Nippondenso
1 – a head,
2 – knot of a drive,
3 – the lever of a drive,
4 – the electromagnetic switch,
5 – stator,
6 – a rotor,
7 – brush holder,

Starters Bosch


1 – a head,
2 – knot of a drive,
3 – the lever of a drive,
4 – the electromagnetic switch,
5 – stator,
6 – a rotor,
7 – brush holder


REMOVAL AND STARTER INSTALLATION

Removal
PERFORMANCE ORDER
1. To disconnect a wire of weight of the accumulator.
2. To lift and fix in front of the car.
3. To disconnect from a starter the main wire of power supplies, and also an electric wire from the electromagnetic switch of a starter.
4. To unscrew three bolts of fastening and to take a starter from below the car.



Installation

For starter installation it is necessary to execute actions in return classic ford parts sequence in relation to removal process.

DISMANTLING AND STARTER ASSEMBLAGE

For dismantling and assemblage of a starter after its removal from the car it is necessary to take advantage of drawings: Starters Lucas, Starters Cajavec and Nippondenso and Starters Bosch on which correct used ford parts positions of each detail are presented.

After starter dismantling it is necessary to check up:

– A condition of brushes, their deterioration, and also freedom of moving of brushes in ford parts on line;
– Force of a clip and position of springs of brushes;
– A kind of a collector which should be cleared a rag moistened in gasoline or, and прошлифовать a fine-grained emery paper;
– A condition of plugs of self-greased bearings; in case ord thunderbird performance parts of need replacements should be lowered new plugs not less, than for 20 minutes in engine oil (viscosity SAE 30 or 40) before their installation in a starter.

Ford spare parts: Writing diagram: repair generator

AND – Bosch,
IN – Lucas,
With – Motorola 35 A and 45 A,
D – Motorola 55 A and 70 A.
1 – a pulley and the fan,
2 – a forward cover,
3 – a rotor,
4 – the bearing,
5 – stator,
6 – the rectifier,
7 – a back cover,
8 – brush holder,
9 – an electronic regulator of pressure


For dismantling and assemblage of the generator after ord thunderbird performance parts its removal from the car it is necessary to take advantage of drawing on which correct positions of separate details are presented.

In the course of generator repair it is necessary to adhere to following instructions:

– The diodes placed in the generator, are sensitive to a heat; in case of need their replacements in soldering process it is necessary to hold used ford parts their conclusions with metal tweezers which take away heat from a soldering iron sting, and also to limit to a necessary minimum soldering time;
– It is necessary to avoid use of electric ford parts on line soldering irons as in case of damage of their isolation they will cause breakdown generator diodes;
– In the course of control tests of the generator of pressure of a food should not exceed 14В;
– In the course of check diodes it is possible to use a direct current the pressure, not exceeding 24 In;
– For cleaning of details it is necessary to use classic ford parts exclusively gasoline; at once after cleaning of details (especially windings) it is necessary to drain them a stream of compressed air.

Ford spare parts: Repair Automatic box of a gear change: What to do, if the box "has risen"?: Used ford parts

There is a widespread category of automobile owners which at a workshop choice are guided only by one ford parts antenna cable criterion - that more cheaply and it is better. 
The first question which they set to the master: and will cost how many repair?

If the master on вскидку names at once the price, not looking in a box, it is ford parts list better to refuse services of such "expert" at once. Why? 

Yes because without analysis Automatic box of a gear change to define character of breakage and consequently, and work volume, quantity of spare parts and accordingly in what sum all it will pour out, it is impossible!

Let's admit, the master named to you the fixed price and you have agreed. Having disassembled a box, the master sees, that repair cost exceeds the ford parts on line named sum, but it is already adhered to it. Not to burn through, it is compelled to save on spare parts, to put used ford parts details, to use doubtfully cheap ford transmission parts a liquid, and even to fill in the old.

After repair "master" from garage necessarily in words to you will give a guarantee. You are assured, what in a week will find out this master on a classic ford parts former place? And you trust till now in "gentlemen's" agreements? Believe old popular wisdom: "Avaricious pays twice".

Ford spare parts: Repair of brake system Ford

Brakes are one of the main elements of the car on which condition safety of the car directly depends, and is used ford parts possible, and someone's life. Before leaving garage or parking, it is necessary to check up a condition of brake system. If you feel, that with it something not so it is necessary to carry out quickly diagnostics and repair of brake system Ford.

Cars Ford are equipped by enough considerable quantity of gauges which urged to watch a condition of wards of knots and in time to submit an alarm signal. The blinking gauge of level of a brake liquid says that it is necessary to add a brake liquid in a broad tank. If after a while the lamp has started blinking again it is necessary to go urgently to service and to carry out repairs of brake system Ford. Most likely, at you a problem with liquid course. Places where the system has become unfit for use, much: it both hoses, and places of connections, and many other things. Replacement of brake hoses Ford if the problem in them, does not occupy a lot of time. And if one hose from a sin far away it is better to replace all hoses in antique ford parts system – probably has begun to flow, their time has come. Except the gauge of level of a brake liquid about malfunctions of system ford auto parts speaks also the gauge of deterioration brake classic ford parts. Repair of brakes Ford consisting in replacement brake колодок, should be spent ford model a parts
in the service centre, after all your safety depends on it. Except replacement колодок, probably, replacement of brake disks Ford is ford car parts required also. All the matter is that in due course they are used up, and if after gaugings there is no possibility to perform operation расточки with the subsequent polishing replacement of brake disks Ford is obligatory. If not to make it your new brake колодки do not pass also month as replacement is required. At work on replacement brake колодок Ford it is used ford parts necessary to pay attention to survey of brake cylinders. It is a lot of time it will not occupy, and in ford spare parts an emergency used ford parts situation failure of one brake cylinder can lead to unpredictable consequences. Replacement of brake cylinders Ford is obligatory, if their work mismatches passport parametres

Ford spare parts: Engine Ford repair

From all lineup of cars Ford among motorists of Russia uses special popularity Ford Fokus. On cars Ford Focus petrol engines classic ford parts, used ford parts, of family Duratec and diesel ford model a parts engine Duratorq are established. The petrol ford car parts engines, which volume varies from 1,4 to 2 litres, possess high profitability of fuel and the improved traction ford motor parts characteristics. Turbodiesel Duratorq TDCi has volume of 1,8 l.

Power unit Ford Focus copes system of electronic control Ford ЕЕС-V. On petrol engines it is electronic system of ignition 3-D, electronic injection SEFI and detonation gauges. In a diesel engine fuel moves distributive type directly in the combustion chamber.

Ford is necessary for non-failure operation of the engine exclusively exact control of key parametres:
Mix structure;
The moment of its injection in the cylinder;
Qualities of dispersion.

Practice of operation Ford Fokus shows, that reliability of manufacturing of the basic knots of a diesel engine Ford without major repairs provides long work antique ford parts of engines. Possible malfunctions appear in systems of giving of fuel and its injection in combustion chambers more often. Therefore repair Ford in these cases is reduced to adjustment or repair of fuel equipment.

On other representative of family not less popular among the USA motorists Ford – Ford Mondeo – four-cylinder diesel engines with ford auto parts in three various variants of capacity are established. Engines Ford Mondeo though are executed on the highest degree of quality, but, nevertheless, are not deprived annoying defects.

More often originators of malfunctions of the engine can be bearings and radical bearings of a cranked shaft. Weak detonation noise can testify to it from a motor compartment at the cold engine. To check up serviceability шатунных bearings, ford auto parts
it is possible to disperse idling the engine to average turns, and then ford spare parts
sharply to dump gas. If the easy detonation sound is distributed – it is necessary to go urgently to service Ford, as on the person malfunction bearings.

Sometimes, of course, happens simply enough to replace the bearing loose leaf, however diagnostics of the engine Ford can ford motor parts define necessity of more serious repair of knots of the engine (polishing, , new installation of a cranked shaft and so forth).